22
Teletext

Turning teletext on/off

1Select a TV channel or external source providing

a teletext programme.

2Press m to display the teletext.

• Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal,
“No Teletext available” displays.
• The same message displays during other modes if
no teletext signal is available.
TELETEXT
TELETEXT
• Each time you press m, the screen switches as
shown above.
• Press m again to display the teletext on the right
screen and the normal image on the left screen.
NOTE
• Teletext will not work if the selected signal type is RGB
(Page 44).
• Teletext will not work in 3D mode.

Buttons for teletext operations

Buttons Description
:r/s Increase or decrease the page number.
Numeric
buttons 0_9
Directly select any page from 100 to
899 by using the 0_9 numeric buttons.
Colour
(R/G/Y/B)
Select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding colour (R/G/Y/B) on
the remote control unit.
k (Reveal
hidden
teletext)
Reveal or hide hidden information such
as an answer to a quiz.
3 (Freeze/
Hold)
Stop updating teletext pages
automatically or release the hold mode.
[ (Subtitle
for teletext)
Display the subtitle or exit the subtitle
screen.
• Subtitles will not be displayed when
the service does not contain subtitle
information.
1 (Subpage)
Reveal or hide subpages.
• Move to the previous subpage (R).
• Move to the following subpage (G).
• These two buttons are shown on the
screen by the symbols “e” and “f”.
;
Display the top menu.
• The top menu will not be displayed
when the service does not support
top menus.
Watching TV