Useful Features

CH-SETTING

■EZ SETUP

When you move to an area with different broadcasting signals, you may have to set the channel numbers and the time with the EZ SETUP function. To activate EZ SETUP, perform the following procedures.

1Press '/" to select “CH-SETTING” in the SETUP screen, and press ENTER.

2 Press '/" to select “EZ SETUP”, and press ENTER.

3 Press '/" to select “YES”, and press ENTER.

■Setting the AIR/CABLE

It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs.

■Saving broadcast TV channels in the memory

1Press MENU to display the Menu screen.

2Press \/to select “SETUP”.

3Press '/" to select “CH-SETTING”, and press

ENTER.

4Press '/" to select “CH SEARCH”, and press

ENTER.

E Z S E T U P

A I R / C A B L E C A B L E 1

C H S E A R C H

C H M E M O R Y

1Press MENU to display the Menu screen.

2Press \/to select “SETUP”.

3Press '/" to select “CH-SETTING”, and press ENTER.

4Press '/" to select “AIR/CABLE”, and press ENTER. Press '/" to select desired setting, and press ENTER.

E Z S E T U P

 

 

 

A I R / C A B L E

 

A I R

C H

S E A R C H

 

 

 

C H

M E M O R Y

 

C A B L E

 

 

 

 

 

 

5Press MENU to exit.

A

• Receivable channels of your LCD TV set are:

AIR channels:

CABLE channels:

VHF: 2 through 13

1 (HRC and IRC)

UHF: 14 through 69

2 through 125 (STD, HRC and IRC)

5Press ENTER. The tuner will search through all available channels in your area and add them to the TV memory.

2

S T E R E O

S A P

M O N O

A

•To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will stop at the current channel and will not add any higher channels.

■Adding weak or additional channels or erasing unwanted channels from TV memory

Individual settings of programs can be adjusted.

1In step 4 above, press '/" to select “CH MEMORY”, and press ENTER.

E Z S E T U P

 

 

 

A I R / C A B L E

C H A N N E L

A I R

2

C H

S E A R C H

S K I P

O N

 

C H

M E M O R Y

 

 

 

 

 

 

 

 

2Press '/" to move the cursor to “CHANNEL”, and use \/or Channel Select to select each desired channel to add or erase.

3Press '/" to move the cursor to “SKIP”, and use \/to select “ON” or “OFF”.

4Press MENU to exit.

A

•If CH SEARCH is performed again, the previously memorized channels will be lost.