Basic Operation (Continued)

Sound Volume

■ To adjust the volume

●Press VOL (+) to increase the sound volume. The bar indicator shifts right.

VOLUME 50

●Press VOL (–)to decrease the sound volume. The bar indicator shifts left.

VOLUME 10

■To mute the sound

●Press MUTE to temporarily turn off the sound.

The MUTE mark is displayed for 4 seconds.

●Press MUTE or VOL (+)/(–)to turn the sound back to the previous level.

The mute function is automatically turned off when any of the following buttons are pressed: POWER, MUTE, VOL (+)/(–)or MTS.

VOLUME 10

A

•When VOL (+)/(–)is pressed in the Mute mode, the sound turns on and the volume indicator is displayed.

•The Mute function is canceled when POWER is pressed.

■To select MTS (Multichannel TV Sound)

1Press MTS to display the MTS screen.

2Press MTS to select the MTS settings.

STEREO: stereo audio

SAP: secondary audio program

MONO: monophonic audio

STEREO <ON A I R

SAP <ON A I R

MONO

A

•“ON AIR” appears when a STEREO or SAP broadcast is being aired.

Changing Channels

You can select channels using Channel Select or

CH ( )/( ).

•This LCD TV set allows you to select up to 125 channels

(1 to 125). To select a channel, enter a 2- or 3-digit number.

■Using Channel Select

When selecting the channel using Channel Select, complete input of the channel number by holding down the button for the last digit for a moment.

To select a 1- or 2-digit channel number (e.g., Channel 5):

Complete the following procedure within 4 seconds.

1

Press the

button.

2

Press the

button.

 

 

0 –

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

A

•When selecting a 1-digit channel number, do not fail to press the button first.

To select a 3-digit channel number (e.g., Channel 115):

Complete the following procedure within 4 seconds.

1

Press the

button.

2

Press the

button.

 

 

1 – –

 

 

 

1 1 –

 

 

 

 

 

 

 

 

 

3Press the button.

1 1 5

A

•The 3-digit channel number can be selected only when the receiving mode is set to CABLE in CH-SETTING.

Changing channels with CH ( )/( ) on the remote control Air: Press CH ( ) and the channels change in the order shown below:

2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .

Press CH ( ) and the channels change in the order shown below: 3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .

Cable: Press CH ( ) and the channels change in the order shown below: 1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .

Press CH ( ) and the channels change in the order shown below: 3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .

■Using FLASHBACK

●Press FLASHBACK to switch the currently tuned channel to the previously tuned channel.

●Press FLASHBACK again to switch back to the currently tuned channel.