Sharp LC 65D64U manual 33

Using external equipment

Displaying an image from HDMI equipment

1	To watch an HDMI or PC-IN equipment image,
	select “INPUT4”, “INPUT5” or “INPUT 6” from
	“INPUT SOURCE” menu using INPUT on the
	remote control unit or on the TV.
				INPUT SOURCE
					TV
					INPUT1
					INPUT2
					INPUT3
					INPUT4
					INPUT5
					INPUT6
					INPUT7
2	Press MENU to display the MENU screen, and
	then press c/d to select “Option”.
3	Press a/b to select “HDMI Setup”, and then
	press ENTER.
			Audio Only
			Digital Noise Reduction				[Low]
			HDMI Setup
			Output Select				[Fixed]
4	Press a/b to select the desired item, and
	then press ENTER.
5	Press c/d to select the desired setting, and
	then press ENTER.
HDMI		Selectable
Setup						Description
		items
items
Auto View		Enable				Set whether or not to use
		Disable				View Mode based on signal
						recognition, including an HDMI
						signal.
Audio		Digital				Select “Digital” for an audio
Select		Analog				signal via the HDMI terminal.
						Select “Analog” for an audio
						signal via the R-AUDIO -L
						terminal.

6 Press MENU to exit.

NOTE

•Refer to your external equipment operation manual for the signal type.

•“Audio Select” is only available for INPUT 6.

•When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Input Skip

This setting allows you to skip the HDMI or PC-IN Input on the Input Selection operation.

1	Press MENU to display the MENU screen, and
	then press c/d to select “Setup”.
2	Press a/b to select “Input Skip”, and then
	press ENTER.
3	Press a/b to select the Input (INPUT 4,
	INPUT 5, INPUT 6 or INPUT 7) you wish to
	skip, and then press ENTER.
	Input 4	(HDMI)
	Input 5	(HDMI)
	Input 6	(HDMI)
	Input 7	(RGB)
			Yes	No

4	Press c/d to select “Yes”, and then press
	ENTER.
5	Press MENU to exit.

31