CHANGING THE RESOLUTION
You can select the resolution as appropriate for the original type. This section explains how to set the resolution to "300X300dpi", which creates a clearer image than the default resolution.
The side to be scanned must be face up! 1 Place the originals.
When using the document glass, place the original with the side to be scanned face down.
(1)
BACK OK | 2 Select settings. |
(1) Select the [Resolution] key.
Select with 
and press [OK].
(2)
(3)
BACK OK
(2) Select the [300X300dpi] key.
Select with 
and press [OK].
(3) Select the [Basic Menu] key.
Select with 
and press [OK].
The base screen of scan mode appears.
3 Select the destination and then press the [COLOUR START] key or the [BLACK & WHITE START] key.
Cancel scanning
105
