136
TROUBLESHOOTING AND MAINTENANCE
Removing staple jams
Follow the steps below to remove a staple jam.
1Open the cover.
2While pressing the lever over to the
left, slide the finisher to the left until it
stops.
Gently slide the finisher
until it stops.
3Lower the staple case release lever
and remove the staple case.
Pull the staple case out
to the right.
4Raise the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading
staple if it is bent. If bent
staples remain, a staple
jam will occur again.
5Lower the lever at the front end of the
staple case.
6Replace the staple case.
Push the staple case in
until it clicks into place.
7Slide the finisher back to the right.
Gently slide the finisher
back to the right until it
locks into its original
position.
8Close the cover.
Take care that a bent staple does not hurt
you.
Caution