135
5
STAPLE CARTRIDGE REPLACEMENT
(when the finisher (MX-FN13) is installed)
When the staple cartridge runs out of staples, a message will appear in the ope ration panel. Follow the procedure
below to replace the staple cartridge.
Replacing the staple cartridge
1Open the cover.
2While pressing the lever over to the
left, slide the finisher to the left until it
stops.
Gently slide the finisher
until it stops.
3Lower the staple case release lever
and remove the staple case.
Pull the staple case out
to the right.
4Remove the empty staple cartridge
from the staple case.
5Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge
in until it clicks into place.
6Replace the staple case.
Push the staple case in
until it clicks into place.
7Slide the finisher back to the right.
Gently slide the finisher
back to the right until it
locks into its original
position.
8Close the cover.
Make a test print or copy in staple sort mode to verify that stapling takes place correctly.
Note