94
SYSTEM SETTINGS (GENERAL)
EXECUTING A JOB PROGRAM
1Press the [#/P] key ( ).
2Touch the program number key of the
desired program.
The job program will be
executed. A number for
which no job program
has been stored cannot
be selected.
3Place the original, check the original
size, and then set the number of
copies and any other desired copy
settings not stored in the program.
When finished, press the [START] key
().
DELETING A STORED JOB PROGRAM
1Press the [#/P] key ( ).
2Touch the [STORE/DELETE] key.
3Select the program number of the
program to be deleted.
If a number key for which
no job program has been
stored is selected, the
proceed to step 4 on the
previous page (for
storing a job program).
4Touch the [DELETE] key.
The selected program will
be deleted and you will
return to the screen of step
3. If the [CANCEL] key is
touched, you will return to
the screen of step 3
without deleting the
program.
If you are finished deleting programs, touch the [EXIT]
key in the screen of step 3 to exit.
LOGOUT
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL
UT
LOGOUT
LOGOUT
NUMBER.
ECALL STORE/DELETE
EXIT
STORE/DELETE
RECALL STORE/DELET
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
CANCEL DELETE STORE