7-36
SYSTEM SETTINGS
Contents
*1 When a saddle stitch finisher is installed.
*2 When a finisher is installed.
*3 When a large capacity tray is installed.
*4 When a saddle stitch finisher or finisher is installed.
*5 When an inserter is installed.
*6 When a punch module is installed.
Copy Function Settings
Disabling of Finisher*4Disabled 7-72
Disabling of Inserter*5Disabled 7-72
Disabling of Offset Disabled 7-72
Disabling of Stapler*4Disabled 7-72
Disabling of Punch*6Disabled 7-72
●Fusing Control Settings 60 - 89g/m2 (16 - 23 lbs.) 7-72
Item Factory default setting Page
■Copy Function Settings 7-73
●Initial Status Settings
7-73
Paper Tray Varies depending on the machine
configuration
Exposure Type Auto
Copy Ratio 100%
2-Sided Copy 1-Side to 1-Side
Output –
●Other Settings 7-74
Copy Exposure Adjustment 57-74
Rotation Copy Setting Enabled 7-74
Add or Change Extra Preset Ratios –7-74
Setting a Maximum Number of Copies 999 7-74
Initial Margin Shift Setting
7-74Side 1 10 mm (1/2")
Side 2 10 mm (1/2")
Erase Width Adjustment
7-74Edge Clearance Width 10 mm (1/2")
Centre Clearance Width 10 mm (1/2")
Card Shot Settings
7-74Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
Fit to Page Disabled
Automatic Saddle Stitch*Enabled 7-74
Initial Tab Copy Setting 10 mm (1/2") 7-74
Item Factory default setting Page