7-37
SYSTEM SETTINGS
Contents
* When a saddle stitch finisher is installed.
Network Settings
Disabling Deletion of Job Programs Disabled 7-75
Disabling of Bypass-Tray in Duplex Copy Disabled 7-75
Disabling of Auto Paper Selection Disabled 7-75
Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-75
600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-75
Quick Scan from Document Glass Enabled 7-75
Auto Clear Before Copy Job Execution Disabled 7-75
Item Factory default setting Page
■Network Settings 7-76
●IPv4 Settings DHCP 7-76
●IPv6 Settings Disabled 7-76
●Enable TCP/IP Enabled 7-76
●Enable NetWare Enabled 7-76
●Enable EtherTalk Enabled 7-76
●Enable NetBEUI Enabled 7-76
●Reset the NIC –7-76
●Ping Command –7-76
Item Factory default setting Page