Sharp PG-C30XU Basic Operations

E-17
Operation
Basic Operations
4
3
3Rotate the zoom ring. The image can be adjusted
to the desired size within the zoom range.
4Rotate the focus ring until the image on the screen
becomes clear.
5Press INPUT to select the desired input mode.
Press INPUT again to change the mode.
EXAMPLE
INPUT 1 Mode
INPUT 2 Mode
INPUT 3 (VIDEO)
Mode
f
f
•When no signal is being received, “NO SIGNAL” will be
displayed. When a signal that the projector is not preset
to receive is being received, “NOT REG.” will be displayed.
6Press VOLUME / to adjust the volume.
7Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
8Press POWER OFF.
Press POWER OFF again while the message is
displayed.
5
6
7
8
•If you accidentally pressed POWER OFF and do not want
to turn off the power, wait until the power off screen
disappears.
•When POWER OFF is pressed twice, the POWER indicator
will light up red and the cooling fan will run for about 90
seconds. The projector will then enter standby mode.
•Wait until the cooling fan stops before disconnecting the
power cord.
•The power can be turned on again by pressing POWER
ON. When the power is turned on, the POWER indicator
and the LAMP REPLACEMENT indicator light green.
•The POWER indicator flashes if the bottom filter cover is
not securely installed.
6
7
8
5
PG-C30XU/CD (E)-c 00.5.19, 3:46 PM17