-12
5 Click “Internet Protocol Versi on 4
(TCP/IPv4)”, and click the
“Properties” button.
6 Confi rm or change an IP address
for the setup computer.
1 Confi rm and note the cu rrent IP
address, Subnet mask and Default
gateway.
Make sure to note the current IP address,
Subnet mask and Default gateway as you
will be required to reset them later.
2 Set temporarily as follows:
IP addres s: 192.168.150 .3
Subnet mask: 255.255.255.0
Default gateway: (Do not in put any
values.)
The factory default settings for the proje ctor are
as follows:
DHCP Client: OFF
IP address: 192.168.150.2
Subnet mask : 255.255.255.0
Default gateway: 0.0.0.0
•
Note
7 After setting, clic k the “OK”
button, and then restar t the
computer.
5
1
2
1
2
6
7
After confi rming or setting, proceed to “3. Setting up Network Connection for th e Projector”.
Setting up the Projector Network Environm ent