Sharp PN-525U Enlarge, SCHEDULE, Menu Items

Enlarge

You can align 4, 9, 16, or 25 monitors and integrate them into a single large screen to display.

Enlarged views of separated images are displayed in each monitor.

In horizontal orientation

Original

image

4 monitors		9 monitors
0	1	0	1	2
2	3	3	4	5
		6	7	8

Menu Items

SCHEDULE

You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See page 19.)

SCHEDULE			PC2 ANALOG
	XXXX/XX/XX XXX XX:XX:XX
No. (1) POWER (2)		DAY OF THE WEEK (3)	TIME(4) INPUT(5)

OK…[MENU]

ENGLISH

16 monitors

03

1 2

4	5	6	7
8	9	10	11
12	13	14	15

25 monitors

0	1	2	3	4
5	6	7	8	9
10	11	12	13	14
15	16	17	18	19
20	21	22	23	24

1 0 2 4 x 7 6 8 V: 60 Hz H: 48.4 kHz

1.	Press	or	to select the SCHEDULE number, and
	press	.
2.	Set the SCHEDULE. (See the description below.)
	Press	or	to select items, and press	or	to
	change the setting.
3.	Press MENU .
	SCHEDULE becomes effective.

In vertical orientation

Original

image

(1)

●: SCHEDULE effective

-: SCHEDULE not effective

(2) POWER

4 monitors

20

3 1

16 monitors

9 monitors

6 3 0

7 4 1

8 5 2

25 monitors

ON : Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the monitor in standby mode.

(3) DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE. ONLY ONCE:

Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE.

EVERY WEEK:

Executes the SCHEDULE on the specified day of the week

12	8	4	0	20	15	10	5	0
13	9	5	1	21	16	11	6	1
14	10	6	2	22	17	12	7	2
15	11	7	3	23	18	13	8	3
				24	19	14	9	4

TIPS

•AV input signals cannot be used for the Enlarge function.

•To integrate 9 or more monitors using PC1 signals, a splitter for the video signal (commercially available) is required.

•When connected in PC2/PC3, a splitter for the video signal (commercially available) is required.

•When Enlarge is used, the SCREEN MOTION function is disabled.

•When Enlarge is used, the AUTO INPUT CHANGE function is disabled.

every week. Specify the day of the week to execute the

SCHEDULE.

Periodic setting such as “Monday through Friday” is also possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day of the week.

(4) TIME

Specifies the time to execute the SCHEDULE. Set the time on a 24-hour basis.

(5) INPUT

Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears.

Input modes displayed on “PC1/AV1” depend on DVI SELECT settings.

Input modes displayed on “PC3/AV2” depend on BNC SELECT settings.

21 E