Sharp R-2110J 5 TOOLS RECOMMENDED FOR INSTALLATION, 6 INSTALLATION HARDWARE

8
UNPACKING AND INSTALLATION INSTRUCTIONS
•Phillips Screwdriver
•Electric Drill
•1/2”, 5/8” and 3/32” Drill Bits
•1-1/2” Wood Bit or Metal Hole Cutter
(if metal cabinet is used)
•Saw to cut exhaust opening
(if needed)
•Protective Drop Cloth for product and
range - you may also use carton for
protection
•Scissors
•Pencil
•Measure
•Tape
Figure 4
Parts shown not to common scale.
ITEM NAME QUANTITY PART CODE
1Wood Screw 5 X 30 mm 6* XTSSD50P35000
2Toggle Bolt with nuts #10 - 24 X 50 mm 4** LX-BZ0195WRE0
3Top Cabinet Screw 5 X 60 mm 2 XBRSD50P60000
4Power Cord Hanger 1 LX-MZB001MRE0
5Tapping Screw 4 x 12 mm 8 XOTSE40P12000
6Flat Washer 30 mm diameter 2 XWHSD50-16300
7Grommet 1 LBSHC0040MRE0
8Rear Cushion 1 PCUSUB059MRP0
9Exhaust Damper Assembly 1 FFTA-B005MRK0
!Scale Plate 2 LANG-B004MRP0
"Grease Filter 2 PFIL-B008MRE0
#Bottom Sash 1 HDEC-B001MRF0
(white model) HDEC-B005MRF0
The INSTALLATION HARDWARE items 1 - 7 are in a small bag. Items 8 - " are packed separately. All items
are in a small carton packed below the oven.
5 TOOLS RECOMMENDED FOR INSTALLATION
6 INSTALLATION HARDWARE
* Must use two - may use remaining four. **May not use all depending on stud location.
R-2110J manual#372 5/10/04, 2:44 PM8