Sharp R-409Y C O N T R O L S, Setting The Clock, Kitchen Timer Mode, How To Use As A Minute Timer

C O N T R O L S

SETTING THE CLOCK

When the oven is fi rst plugged in, the display will show “:0” and a tone will sound. If the AC power ever goes off, the display show “ : 0” when the power comes back on.

1.Touch the CLOCK pad.

This is a 12 hour clock system.

2.Touch the CLOCK pad once more. This is a 24 hour clock system.

3.Enter the correct time of day by touching the TIME SET pads in sequence.

4.Touch the CLOCK pad.

NOTE : This oven has multiple clock systems. If you want 12 hour clock system, omit this step.

The display stops blinking, and the colon starts blinking. If you selected 12 hour clock system, this digital clock allows you to set from 1:00 to 12:59. If you selected 24 hour clock system, this digital clock allows you to set from 0:00 to 23:59.

NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will sound. Touch the CLOCK pad and re-enter the time.

KITCHEN TIMER MODE

Timer operates as a minute timer, can be set to delay cooking and used to set a holding time after cooking. However delay cooking can not be programmed for defrost. Timer operates without microwave energy.

HOW TO USE AS A MINUTE TIMER

1. Touch KITCHEN TIMER pad.

2.Press the amount of time you want to count down.

3.Touch START pad.

The TIMER indicator lights and “ : 0” is displayed.

The display will show what you touched.

The TIMER indicator starts blinking and the display counts down the time remaining in KITCHEN TIMER mode. When KITCHEN TIMER mode ends, you will hear 3 beeps.

11