Sharp SD-AS10 - page 44

SD-AS10

Advanced Features

- Changing the default settings of the amplifier -

Changing the default settings of the amplifier (continued)

"Speaker delay setting

When some of the speakers are at a different distance from the listening point, you

can select the speaker delay to make it seem as though the speaker distances are

the same.

Switch the function to "DVD" to change the default settings of the amplifier.

If you press during the

operation, you can go

back one step.

1Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET

UP button.

2Within 10 seconds, press the or button to

select "SP DELAY", and press the ENTER

button.

3Within 30 seconds, press the or button to

select the desired speaker.

The indicator of the selected speaker flashes.

4Within 30 seconds, press the or button to

select the distance.

!You can change the distance in 1 foot (0.3 m) steps.

!To set the distance of other speakers, repeat the op-

eration from step 3.

5Press ENTER button to confirm the setting.

6Press the RETURN button twice.

The setting is complete.

Speaker type Delay range Default setting

FL Front speaker (Left) 1 to 29 ft 6 ft (2 m)

CT Center speaker 1 to 29 ft 6 ft (2 m)

FR Front speaker (Right) 1 to 29 ft 6 ft (2 m)

SR Surround speaker (Right) 1 to 29 ft 6 ft (2 m)

SL Surround speaker (Left) 1 to 29 ft 6 ft (2 m)

SW Subwoofer 1 to 29 ft 6 ft (2 m)