Sharp SD-AS10 - page 45

SD-AS10

Advanced Features

- Changing the default settings of the amplifier -

"Speaker level setting

If sounds from the speakers are uneven, you can equalize them by adjusting the

speaker levels.

Note:

If subwoofer sound is distorted, lower the subwoofer level.

"Test ton e

You can check each speaker sound by a test tone. Readjust the volume set in

"Speaker level setting".

1Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET

UP button.

2Within 10 seconds, press the or button to

select "SP LEVEL", and press the ENTER but-

ton.

3Within 10 seconds, press the or button to

select the desired speaker.

The indicator of the selected speaker flashes.

4Within 10 seconds, press the or button to

adjust the level.

!You can adjust the level at 1 dB intervals.

!To adjust the levels of other speakers, repeat the op-

eration from step 3.

5Press the RETURN button twice.

The setting is complete.

Speaker type Level range Default setting

FL Front speaker (Left) - 6 dB to + 6 dB 0 dB

CT Center speaker - 6 dB to + 6 dB 0 dB

FR Front speaker (Right) - 6 dB to + 6 dB 0 dB

SR Surround speaker (Right) - 6 dB to + 6 dB 0 dB

SL Surround speaker (Left) - 6 dB to + 6 dB 0 dB

SW Subwoofer - 10 dB to + 10 dB + 3 dB

1Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET

UP button.

2Within 10 seconds, press the or button to

select "TONE", and press the ENTER button.

The test tone will be heard from each speaker, in order, at about 2-second inter-

vals.

To adjust speaker levels

While the test tone is heard:

Adjust the level with the or button.

Press the or to select a speaker.

3Press the RETURN button twice.

The setting is complete.

FL CT FR

SW SL SR