E-58
ENGLISH
SD-PX2
References
- Maintenance / Error indicators and warnings -
Maintenance
Cleaning the cabinet Cleaning the laser pickup lens
Notes:
zClose the disc compartment when it is not used.
zBe careful not to damage the optical pickup or to touch it by hand.
Error indicators and warnings
When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.
Periodically wipe the cabinet with a soft
cloth and a diluted soap solution, then with
a dry cloth.
zDo not use chemicals for cleaning (gas-
oline, paint thinner, etc.). It may dam-
age the cabinet finish.
zDo not apply oil to the i nside of the unit.
It may cause malfunctions.
Do not touch the laser pickup lens. If fin-
gerprints or dust accumulate on the pick-
up, clean it gently with a dry cotton swab.
Laser pickup lens
Display Meaning
DSP NG zPlace the unit away from noise source or plug the
AC power cord to another AC outlet. (*)
Er-** zThe unit considers the DVD mechanism is defective.
(** indicates numbers/sym-
bols.) zThe amplifier is defective.
Set this unit to the stand-by mode and turn the power
on again. (*)
FAN LOCK zThe cooling fan on the back of the main unit does not
run due to foreign objects caught in it.
Set this unit to the stand-by mode and remove the
foreign objects around the fan.
NO DISC zThe disc is not loaded.
zThe disc is loaded upside down.
NO PLAY zThe disc's region number is neither 1 nor ALL.
No Signal zThe digital audio input jack is not connected proper-
ly.
zUnspecified signal is received and cannot be recog-
nized.
(*): Should the same message appear even if the unit is unplugged and plugged in or
is set to the stand-by mode and on again, contact your local dealer where you pur-
chased the unit.
TV screen Meaning
The disc cannot be played with this unit or the
disc is loaded in an incorrect way.
The region number of the DVD is not "1" or
"ALL".
A disc has not been loaded.
zYou are trying to perform an incorrect oper-
ation.
zThe operation is prohibited.
The disc does not support the operation de-
scribed in this operation manual.
C
01
83/
15/0
::23 40
WR O NG D CIS T EYP
C
01
83/
15/0
::23 40
REG NIO DCO E RER OR
NO DISC
NOT
LAL OWED
ACC SES
NDE I ED