CARE AND CLEANING
WARNING
■Unplug the refrigerator first to prevent electric shock.
■Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation.
IMPORTANT
To prevent cracking on inside surfaces and plastic components, follow these tips.
•Wipe any food oils adhered to plastic components.
•Some household chemicals may cause damage,so use only diluted
•If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts can result.
1 Remove the accessories e.g. shelves from the cabinet and door. Wash them in warm soapy dishwashing water; rinse in clean water and dry.
2 Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to wipe off soapy water.
3 Wipe the exterior with a soft cloth each time it is soiled. 4 Clean the magnetic door seal with a toothbrush and
warm soapy dishwashing water.
5 Wipe the control panel with the dry cloth.
NOTE
•To prevent damage to your refrigerator, do not use heavy duty cleansers or solvents (lacquer, paint, polishing powder, benzine, boiled water, etc.)
•If the power supply is disconnected, please wait for at least 5 minutes before
•The glass shelves weigh approximately 2kg each. Hold firmly when removing from the cabinet or carrying.
•When dropped the juice and the like near the control panel, wipe off directly. It becomes cause of failure of the control panel.
•Do not drop objects inside the refrigerator or strike the inner wall. This may cause the inner surface to crack.
Defrosting
Defrosting is fully automatic due to a unique energy saving system.
When the compartment light is blown
Contact the service agent approved by SHARP to request a replacement compartment light. The compartment light should not be removed other than by qualified service personnel.
Switching off your refrigerator
If you switch your refrigerator off when you are going away for an extended period, remove all food, clean the interior thoroughly. Remove the power cord plug from the power socket and leave all doors open.
BEFORE YOU CALL FOR SERVICE
Before you call for service, check the following points.
Problem | Solution |
The outside of the cabinet is hot | It is normal. The hot pipe is in the cabinet in order to prevent dew generation. |
when touched. |
|
When there is refrigerator noise. | It is normal for the refrigerator to produce the following sounds. |
| • Loud noise produced by the compressor when operation starts |
| |
| • Loud noise produced once a day by the compressor |
| |
| • Sound of flowing fluid (gurgling sound, fizzing sound) |
| |
| • Cracking or crunching sound, squeaking sound |
| |
| during cooling. |
Frosting or dew generation occurs | This may occur in one of the following cases. Use a wet cloth for wiping frost and |
inside or outside the refrigerator. | a dry cloth for wiping dew. |
| • When the ambient humidity is high. |
| • When the door is frequently opened and closed. |
| • When foods containing plenty of moisture are stored. (Wrapping is required.) |
The foods in the refrigerator | • Is the refrigerator operated for a long time with refrigerator temp. control set at 0°C? |
compartment freeze. | • Is the refrigerator operated for a long time with freezer temp. control set at |
| • Low ambient temperature may cause placed foods to freeze even if refrigerator |
| temp. control is set to 6°C. |
It smells in the compartment. | • Wrapping is required for the foods with strong smell. |
| • Deodorizing unit cannot remove all of the smell. |
IF YOU STILL REQUIRE SERVICE
Refer to your nearest service agent approved by SHARP. ( tel : 0845 882 0025 )
| In Europe represented by |
|
SHARP CORPORATION | SHARP ELECTRONICS EUROPE LTD. |
|
4 Furzeground Way, Stockley Park, | Printed in Thailand | |
Osaka. | Uxbridge, Middlesex, UB11 1EZ, U.K. | |
12 |
| |
|
|