Inkjet Fax

QUICK SETUP GUIDE

IMPORTANT!!

Should you require any assistance setting up or operating your product, please

DO NOT RETURN YOUR PRODUCT TO THE STORE.

After referring to the setup guide and operation manual, if you still require assistance please consult our web page at www.sharpusa.com. From our web page you will be able to directly e- mail our customer support team.

If you would like personal assistance, please call our Customer Assistance Center at 1-877-794- 8675.

1

1. Open the cover () and

2. Close the print

2

Connect the handset.

 

 

remove the tape ().

compartment cover.

 

 

 

 

(Do not install the print

 

 

 

2

cartridge yet.)

 

 

 

1

 

 

 

3

Attach the trays.

Attach the document

 

exit tray and flip out

 

the extension

Attach the paper tray

Attach the received document tray

Pull the received document tray extension all the way out

4

Load paper.

Fan the paper, and tap the edges against a flat surface to even the stack.

The stack should not

5

1. Connect the phone line cord

2. Plug the power cord into a

 

 

to the TEL. LINE jack and a

120 V grounded outlet.

be higher than this line

 

wall jack.

 

Pull the paper plate forward and insert the paper

print side up.

Note: If you are loading legal paper, see pages 45 and 48 of the manual to change the paper size setting to LEGAL (first install the print cartridge).

6

Install the Print Cartridge.

 

 

1. Open the operation

2. Remove only the tape from the new cartridge.

 

panel.

IMPORTANT: Make sure all tape is removed.

Caution! Do not touch the gold contact area.

3.Make sure the cartridge holder is in the position shown. Place your fingers on top of the holder and open the holder release.

4.Insert the new print cartridge (). Close the holder (), making sure it clicks into place.

2

1

5.Close the cover, pressing firmly on both front corners.

Display: CHANGE CARTRIDGE 1=NEW, 2=OLD

6. a. Press to select NEW.

b. Press .

The machine will print an alignment page.

7.In the alignment page, locate the line that is closest to a completely straight line. Enter the number of that line.

Example: (To clear a mistake,

press .)

In this example, “15” is closest to a straight line

8. Press .

Note: To enter your name and fax number and set the date and time so that they appear at the top of each fax page you send, see pages 11 - 12 of the manual.

7 Setup for Fax to E-mail

To use Fax to E-mail you must:

1.Have an Internet connection

2.Have a router, hub, or switch through which the machine can be connected to the Internet.

Connect one end of an Ethernet cable (not included)* to the LAN port on the machine, and the other end to a LAN port on your router, switch, or hub.

*Please purchase a 10Base-T/ 100Base-TX straight-through (regular) Ethernet cable.

The machine requires an IP address to communicate. Most networks assign an IP address automatically when a device is connected.

If your network requires that a permanent IP address be assigned to the machine, see page 23 of the manual.

See page 17 of the manual to configure the E-mail settings (“SENDER ADDRESS” and “SMTP SERVER” must be configured to use Fax to E- mail).

(TCADH3894XHZZ)