27
Power Control
Power control setting allows you to save energy.
Power
Control
Menu
Audio Only
No Signal Off
Power Saving
No Operation Off
[Disable]
[Disable]
[ Standard]
Power Control
Example
1 Press MENU to display the MENU screen, and then
press c/d to select "Power Control".
2 Press
a/b to select a specifi c adjustment item,
and then press ENTER.
3 Press
a/b (or c/d) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Skip this step for "Audio Only".

Audio Only

When listening to music from a music program, you
can turn the screen off and enjoy audio only.
Video On: Audio is output without screen image.
Video Off: Both screen images and audio are output.
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
•
On-Screen Display Menu

Power Saving

This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", " " appears on the
screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
" " appears on the screen.
Off: This function does not work.
• "Power Saving" does not function when you set AV MODE
to "AUTO" or "DYNAMIC (Fixed)".
• You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
—If you set "OPC" to "On" when "Power Saving" is set
to "Standard", then the "Power Saving" setting will
change to "Advanced".
—When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
—"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
• When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture Settings menu screen.
• You can select Power Saving by pressing POWER
SAVING on the remote control unit. (See page 20.)

No Signal Off

When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
• "Disable" is the factory preset value.
•
When a TV program fi nishes, this function may not operate.

No Operation Off

When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
• "Disable" is the factory preset value.