Image Projection (Continued)

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

PressC INPUT 1, C INPUT 2, DINPUT 3 or EINPUT 4 on the remote control to select the input mode.

• When pressing INPUT (P/R) on the projector, input mode switches in the following order:

INPUT1 INPUT2 INPUT3 INPUT4.

•When “Auto Search” is set to “On”, INPUT (P/ R) on the projector functions as the Auto Search buttons. (See page 43.)

AV MUTE button

Volume buttons

Adjusting the Volume

Press K/L on the remote control or

–O/Q+ on the projector to adjust the vol- ume.

Note

On-screen Display

 

•Pressing K/–Owill lower the volume.

•Pressing L/Q+ will raise the volume.

•When the projector is connected to external equipment, the volume level of the external equip- ment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when turning the projector on/ off or changing the input signal.

•When you do not want to output the sound from the projector’s speaker while the projector is con- nected to external equipment, set “Speaker” in “PRJ-ADJ” menu to “Off”. (See page 43.)

INPUT buttons

Displaying the Black Screen and Turning off the Sound Temporarily

Press MAV MUTE on the remote con-

trol to temporarily display a black On-screen Display screen and turn off the sound.

Note

•Pressing MAV MUTE again will turn the projected image back on.

30