Sharp XG-PH70X, XG-PH70X-N Using the Remote Control as a Wireless Computer Mouse, When, When, mouse, Introduction, left-clicking, right-clicking, 2 Slide the ADJ./MOUSE

Using the Remote Control as a Wireless Computer Mouse

When connecting the supplied remote
mouse receiver to the computer, you can use	Supplied	Remote mouse
the remote control as the wireless computer
	accessory	receiver
mouse.

Introduction

1 Connect the supplied remote mouse receiver to the USB terminal on the computer.

2 Slide the ADJ./MOUSE	ADJ.
switch on the remote con-
trol to the MOUSE position.	MOUSE

3 Use the mouse function.

•Point the remote control at the remote mouse receiver.

■When moving the cursor Press '/"/\/.

■When left-clickingPress .

■When right-clickingPress .

■When your computer supports only a one-click mouse (such as Macintosh®)

Press or . ( and have com- mon function.)

Note

•This function only works with the Microsoft® Windows® OS and Mac OS®. However, this func- tion does not work with the following operation systems that do not support USB.

•Versions earlier than Windows® 95.

•Versions earlier than Windows® NT4.0.

•Versions earlier than Mac OS® 8.5.

•Confirm that the computer recognizes the USB connection.

•While the remote control is connected to the projector with a signal cable, you cannot use the wireless computer mouse function.

Computer Remote mouse receiver

To USB terminal

ADJ./MOUSE switch

Mouse/adjustment button ('/"/\/)

R-click button

L-click button

-19