Sharp XL-HF301PH(S), XL-HF201PH(BK) Various disc functions, Direct track search, Repeat play

Listening to a CD or MP3/WMA disc (continued)

Advanced CD or MP3/WMA disc playback

5 Press the OPEN/CLOSE button to close the disc tray.

6Press the / (CD/USB / ) button to start playback. After the last track is played, the unit will stop automatically.

Caution:

●Do not place two discs in one disc tray.

●Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions.

●Do not push the disc tray whilst it is moving.

●If the power fails whilst the tray is open, wait until the power is restored.

●If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.

●Be sure to place 8 cm (3") disc in the middle of the disc tray.

●Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a normal CD (approximately 20 to 90 seconds).

Notes for CD or MP3/WMA disc:

●When the end of the last track is reached during fast forward, “END” will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode (only for CD).

●Rewritable multi-session discs with unfinished writing, can still be played.

■Various disc functions

Function	Main	Remote	Operation
	unit	control
Play			Press in the stop mode.
Stop			Press in the playback
			mode.
Pause			Press in the playback
			mode. Press the /
			button to resume
			playback from the
			paused point.
Track			Press in the playback or
up/			stop mode.
down			If you press the button in
			the stop mode, press the
			/ button to start the
			desired track.
Fast			Press and hold down in
forward/			the playback mode.
reverse			Release the button to
			resume playback.

CD/USB

RDS

■Direct track search

By using the Numeric buttons, the desired tracks on the current disc can be played.

Use the Numeric buttons on the remote control to select the desired track whilst playing the selected disc.

●The Numeric buttons allow you to select up to number 9.

●When selecting number 10 or higher, use the “10+” button.

A. For example, to choose 13

1	Press the “10+” button once.
2	Press the “1” button.
3	Press the “3” button.	Selected track number

B. For example, to choose 130

1Press the “10+” button twice.

2Press the “1” button.

3Press the “3” button.

4Press the “0” button.

Notes:

●A track number higher than the number of tracks on the disc cannot be selected.

●During random play, direct search is not possible.

To stop playback:

Press the (CD/USB ) button.

■Repeat play

Repeat play can play one track, all tracks or a programmed sequence continuously.

To repeat one track:

Press the REPEAT button repeatedly until “Repeat One” appears. Press the / (CD/USB /) button.

To repeat all tracks:

Press the REPEAT button repeatedly until “Repeat All” appears. Press the / (CD/USB /) button.

To repeat desired tracks:

Perform steps 1 - 5 in “Programmed play” section on page 11 and then press the REPEAT button repeatedly until “Repeat All” appears.

To cancel repeat play:

Press the REPEAT button repeatedly until “Normal” appears and “ ” disappears.

Caution:

After performing repeat play, be sure to press the (CD/ USB ) button. Otherwise, the disc will play continuously.

E-10