Antenna connection

Supplied FM antenna:

Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received.

Supplied AM loop antenna:

Connect the AM loop antenna to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal.

SPEAKERS

RATED SPEAKER IMPEDANCE:

6 OHMS MIN.

SPEAKERS

 

RIGHT

LEFT

AC INPUT

 

Red

Black

Caution:

Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit.

XL-UH240

Use

SPEAKERS

RATED SPEAKER IMPEDANCE:

6 OHMS MIN.

AC INPUT

RIGHT LEFT

VIDEO/AUX IN

RIGHT LEFT

SPEAKERST-UPLIGH

LEFT RIGHT

SUBWOOFER PRE-OUT

 

ANTENNA

FM

GND AM

75 OHMS

Black White

Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.

Do not let the bare speaker wires touch each other.

Do not allow any objects to fall into or to be placed in the bass reflex ducts.

Do not stand or sit on the speakers. You may

be injured.

SPEAKERS

 

IMPEDANCE:

RATED SPEAKER .

 

S MIN

6 OHM

RIGHT

LEFT

 

Incorrect

Preparation for

Note:

Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception.

Installing the AM loop antenna:

 

< Assembling >

< Attaching to the wall >

Speaker Light-Up Connection

Connect the speaker light-up wires to the SPEAKERS LIGHT-UP jacks for speaker illumination. To turn off the speaker light-up feature, press the CLEAR/DIMMER button on the remote control for 2 seconds or more.

Wall Screws (not supplied)

Note:

Placing the right speaker light-up wire to the RIGHT jack and the left speaker light-up wire to the LEFT jack.

11