Front Panel Controls
W R A S
ENGLISH
STANDBY BUTTON/INDICATOR | POWER SWITCH |
Operations
1 To enter the standby mode. | 2 In the standby mode, turn the power on. |
•The STANDBY button lights up in amber. This means that the unit is connected to an AC outlet and a
small amount of current is retained to support | • The STANDBY button lights up in blue, the unit | ||||
operation readiness. | turns on and enters the operating mode. Sound can | ||||
• To switch the power off, push the POWER switch | be heard from the speakers in a few seconds. | ||||
again. Then the power is cut off and the STANDBY |
| ||||
button goes off. |
| ||||
|
|
| |||
3 | In the operating mode, to enter the | Note on system power control | |||
standby mode. | |||||
If the DC TRIGGER connection is made between this | |||||
|
|
| |||
|
|
| unit and Sherwood pre amplifier | ||
|
|
|
| be switched between the standby mode and the | |
|
|
|
| operating mode automatically each time | |
|
|
|
| switched between these modes. | |
|
|
|
| ||
|
|
|
| (For details, refer to the operating instructions of P- | |
|
|
|
| 965.) |
• The STANDBY button lights up in amber.
9