6. CONNECTING SPEAkERS
• Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and
• For installing the speakers, refer to "Speaker placement" on page 10.
• After installing the speakers, first adjust the speaker settings according to your environment and speaker layout. (For details, refer to
"SETTING THE SPEAKER /ROOM EQ SETUP" on page 47.)
■Surround back speakers
• When using only one surround back speaker, you should connect it to SURROUND BACK/ MULTI LEFT channel.
• Because this receiver cannot drive the surround back speakers and the ROOM 2 speakers simultaneously, you should assign their power amplifier correctly depending on how to use them. (For details, refer to "CONNECTING ROOM 2 OUTS" on page 12 and "When selecting the AMP Assign" on page 45.)
■Front Bi-Amp Connections.
• Some speakers are equipped with two sets of input terminals, for
• If no other surround back speakers are used, you can connect the FRONT and the SURROUND BACK/MULTI channels to the bi-
• To drive the
■Note :
• Before making
Caution :
• Be sure to use the speakers with the impedance of 6 ohms or above.
• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.
• Never touch the speaker terminals while the AC input cord is connected to the wall AC outlet. Doing so could result in electric shocks.
ENGLISH
9