www.sherwoodscuba.com

Reassembly

15.Install the Exhaust Valves using the same gentle stretching technique used for removal.

16.Install each Exhaust Valve Cover using only your fingers to tighten. Use of tools may damage the Exhaust Valve Cover.

17.If the demand valve subassembly was cleaned as a unit and not further disassembled install a new LP Seat (3). Do not attempt to use an old seat as the impression in the old seat may prevent adequate sealing.

If the subassembly was disassembled, then place the Poppet (4) on a flat surface with the face the Poppet against the flat surface. Place the Spring (5) over the poppet stem and then place the Lever Support (6) over the Spring. Press down on the Lever Support taking care to match the square feature on the poppet stem with the matching square hole in the Lever Support. When the square features are aligned you will be able to compress the Spring until the Lever Support makes contact with the supporting flat surface. While maintaining the applied fore on the Lever Support, insert the Demand Lever as shown in Illustration 4. Use your fingers to hold the Demand Lever in place and add the stepped Washer (8) to the subassembly with the smallest diameter making contact with the Demand Lever.

1

2

4)Compress the Spring against a flat surface and add the Demand Lever and Washer to the subassembly.

Thread the Lock Nut (9) onto the Poppet just until the end of the poppet shaft starts to protrude from the end of the Lock Nut. The Lock Nut may be reused for several repeated services, but if it has been used to the extent that it rotates with very little resistance or will not stay in position it should be replaced.

Install a new Seat into the Poppet.

18.Inspect the crowned seating surface inside the Inlet Fitting for nicks, deep scratches or other signs of damage. Light corrosion may be removed with a pencil eraser. Do not attempt to polish with abrasive materials. If it is damaged it should be replaced. Install o-ring (2) onto the Inlet Fitting.

19.Insert the demand valve subassembly into position inside the Housing taking care to align the indexing notch with the block feature in the Housing. If these parts cannot be aligned, check to be certain the Demand Lever is not installed upside down.



Page 6 Page 8
Page 7
Image 7
Sherwood SR 7206 manual Reassembly
Page 6 Page 8

SR 7206 specifications

The Sherwood SR 7206 is a versatile and powerful audio receiver that delivers an exceptional audio experience for both music enthusiasts and home theater aficionados. With its robust design and array of features, this receiver has become a popular choice among consumers seeking to enhance their home entertainment systems.

One of the standout features of the SR 7206 is its capability to deliver impressive sound quality. It boasts a power output of 100 watts per channel across seven channels, providing ample power for driving a wide range of speakers. This ensures that listeners can enjoy rich and immersive audio whether they're watching movies, playing video games, or listening to music.

The SR 7206 is equipped with a range of advanced technologies that contribute to its superior audio performance. One such technology is the Dolby TrueHD and DTS-HD Master Audio decoding, which allows for lossless audio playback of high-definition soundtracks. This feature is particularly beneficial for film buffs, as it enables the receiver to reproduce the full dynamic range of soundtracks with precision and clarity.

Another notable characteristic of the Sherwood SR 7206 is its seamless connectivity options. It includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports 4K video pass-through, providing a future-proof solution for those looking to experience ultra-high-definition content. Additionally, it features USB and optical inputs for connecting additional audio sources, ensuring compatibility with a wide range of devices.

The SR 7206 also prides itself on its user-friendly interface. The on-screen display provides easy navigation through the various settings and options, making it simple for users to customize their audio experience. The receiver is also equipped with a remote control, allowing for convenient operation from a distance.

In terms of design, the Sherwood SR 7206 has a sleek and modern aesthetic, with an intuitive layout of knobs and buttons on the front panel. Its sturdy construction ensures durability and longevity, making it a reliable addition to any home entertainment setup.

In summary, the Sherwood SR 7206 is a powerful and feature-packed audio receiver that excels in delivering high-quality sound and seamless connectivity. With its advanced technologies, user-friendly interface, and elegant design, it stands out as an excellent choice for those looking to elevate their audio-visual experience. Whether for movies, music, or gaming, the SR 7206 promises to deliver an exceptional sound experience tailored to the needs of every listener.
Top Page Image Contents