Shindaiwa C2510/EVC, 89303 manual Product Description, 6SHFLÀFDWLRQV

Product Description

Using the illustration as a guide, familiarize yourself with your machine and its various compo- nents. Understanding your machine helps ensure top performance, long service life and safer operation.

Throttle

Trigger

Outer Tube

Ignition

Switch

Throttle Interlock

Hanger

Fuel

Tank

Grip

Handle

Gearcase

Cutting Attachment

Shield

WARNING!

Do not make unauthorized PRGL¿FDWLRQVRUDOWHUDWLRQVWRDQ\RI these units or their components.

6SHFLÀFDWLRQV

Engine Name	C2510
Engine Model	SF2510E
Engine Type	4-cycle, vertical cylinder, air cooled
Dry Weight (Without guard and strap)	5.6 kg/12.4 lb.
Bore x Stroke	1.3 x 1.1 in./ 34 x 27 mm
Displacement	24.5 cc/1.5 cu. in.
Maximum Power Output	1.1 HP (0.8 kW) @ 7500 (min-1)
Engine Idle Speed	3,000 (±250) min-1
Fuel/Oil Ratio	50:1 with ISO-L-EGD or JASO FD class 2-cycle mixing oil
Fuel Tank Capacity	600 ml/20.3 oz.
Carburetor Type	Walbro, WYL, diaphragm-type
Ignition	One-piece electronic, program-controlled
Spark Plug**	NGK CMR5H
Plug Gap	0.6 - 0.7 mm / 0.024 - 0.028 inch
Torque	100-150 kg cm / 9.8 - 14.7 N∙m
Air Cleaner Type	Foam pre-filter; sealed felt main filter
Starting Method	Recoil
Stopping Method	Slide switch
Transmission Type	Automatic, centrifugal clutch w/bevel gear
EPA Emission Compliance Period*	Category A

Specifications are subject to change without notice.

*The EPA emission compliance period referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended)

** The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).

5