Shindaiwa 62719-94310, LE231/EVC manual Product Description, Specifications, Prior to Assembly

Product Description

Using the accompanying illustrations as a guide, familiarize yourself with your unit and its various components. Understanding your unit helps ensure top performance, long service life, and safer operation.

See Figure 4.

WARNING!

Do not make unauthorized modifica- tions or alterations to any of these products or their components.

Prior to Assembly

Before assembling, make sure you have all the components required for a complete unit:

Engine assembly

Outer tube assembly

Cutting attachment shield

Handle

Kit containing cutting attachment shield mounting bracket and hardware, handle

LE231 LAWN

EDGER

		Spark Plug
	Handle	Ignition
		Switch
		Fuel Tank
Cutting Attachment		Grip
Shield		Throttle
Gear case	Outer Tube	Lever
Blade
Figure 4
mounting hardware, this manual and tool	Carefully inspect all components for damage.
kit for routine maintenance. Tool kits vary	IMPORTANT!
by model and may include a hex wrench,

spark plug/screwdriver combination	The terms “left”, “left-hand”, and “LH”;
	“right”, “right-hand”, and “RH”; “front” and
wrench, and spanner wrench.
	“rear” refer to directions as viewed by the
	operator during normal operation.

Specifications

Engine Model		Shindaiwa S230	Muffler	2-Stage, Catalyst
LE231 Dry Weight (less attachments)		........................13.7 lb./6.2 kg	Ignition	One-piece electronic, transistor-controlled
Engine Model		Shindaiwa S230C	Spark plug	Champion CJ8
Engine Type	2-cycle, vertical-cylinder, air-cooled		Air cleaner type	Non-reversible flocked filter element
Bore x Stroke		1.26 x 1.10 in./32 x 28 mm	Starting method	Recoil
Displacement		22.5 cc/1.4 cu. in.	Stopping method	Slide switch
Maximum Power	1.1 HP/0.8 kW @ 7500 RPM (min-1)		Transmission type	Automatic, centrifugal clutch
Fuel/oil Ratio		50:1 with ISO-L-EGD or		w/bevel gear
	JASO FC class 2-cycle Mixing Oil		EPA Emission
Shindaiwa ONE is a registered JASO FC classified oil and also			Compliance Period*	Category A
meets or exceeds ISO-L-EGD performance requirements.			* The EPA emission compliance referred to on the emission compliance label
Fuel Tank Capacity		22.7 oz./670 ml
			located on the engine, indicates the number of operating hours for which the
Carburetor Type	Walbro WYL-122, diaphragm-type		engine has been shown to meet Federal emission requirements. Category
			C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours

(Extended).

*Specifications are subject to change without notice.