Shindaiwa 81604, LE242/EVC manual Safety Instructions Properly Equipped Operator, Use Good Judgment

Safety Instructions The Properly Equipped Operator

WARNING!

Use Good Judgment

ALWAYS wear eye protection to shield against thrown objects.

NEVER run the engine when trans- porting the unit.

NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause serious injury or death.

ALWAYS clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander.

ALWAYS use the proper cutting at- tachment.

ALWAYS stop the engine immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing or improper- ly installed parts or attachments.

NEVER use a non-Shindaiwa ap- proved cutting attachment.

ALWAYS keep the unit as clean as practical. Keep it free of loose vegeta- tion, mud, etc.

ALWAYS hold the unit firmly with both hands when edging, and maintain con- trol at all times.

Wear close-fitting clothing to protect legs and arms. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery

or underbrush. Secure hair so it is above shoulder level. NEVER wear shorts!

Keep a proper footing and do not overreach— maintain your balance at all times during operation.

Wear hearing protection devices

and a broad-brimmed hat or

helmet.

Always wear eye protection such as goggles or safety glasses.

Always operate with both hands firmly gripping the unit.

Always make sure the appropriate cutting attachment shield is correctly installed and in good condition.

ALWAYS keep the handles clean.

ALWAYS disconnect the spark plug wire before performing any mainten- ance work.

Wear appropriate footwear (non-skid boots or shoes):	Keep away from the rotating blade
do not wear open-toed shoes or sandals. Never oper-	at all times, and never lift a moving
ate the unit while barefoot!	attachment above waist-high.
Figure 1