To switch the handset ON or OFF
• Press and hold the CLEAR button for 2~3 seconds to switch the handset ON /OFF.
To make a call
1. Key in the telephone number (If you make a mistake, press CLEAR button to clear
digits from the display. To clear all digits, press and hold CLEAR button.)
2. Press the CALL button.
3. Or you also can dial the stored number through UP/DOWN button.
Note: You can dial the number after you press the CALL button if you need, but you won't
be able to correct any mistakes if you do it in this way.
When you dial the outside line access digit (e.g. 9) then the telephone number, press and hold
the "#" button about 2 seconds for a pause.
To redial a call
In standby mode, press and hold the CALL button to enter the dial list, and press the
UP/DOWN button to scroll through the number you want to dial, then press the CALL
button to redial.
To answer a call
When the handset and base unit ring, press the CALL button to answer a call, and the
symbol or appears in the display.
When the AUTO TALK is turned on, you can simply answer the call by lifting the handset
from the base unit (see AUTO TALK part).
To end a call
Press the END button to end a call.
Earpiece volume
During a call, to adjust the volume of the earpiece:
Press the UP or DOWN button to change the volume.
Muting the mouthpiece
• During a call, if you want the person on the other hand end cannot hear you; press
MUTE once to mute the mouthpiece;
• While the mouthpiece is muted, you cannot press any number key to send digits down
the line; Press MUTE key again to get back to the call.
You need to register with your fixed line network operator for conference calling service. It
is dependant on service availability and subscription.
To Make Conference Call:
1. Connect the first party;
2. Press INT button, and the first party is put on hold;
7