ADJUSTMENTS
Tiller Angle Adjustment (Fig. 5A&B) On the left hand side at the base of the tiller is a red lever/black knob. Push/pull the lever to release the pin and select the required tiller angle. Refit the pin into one of the five location holes.
Seat Slide & Swivel Adjustment (Fig. 6) Pulling up on the seat slide lever allows the seat position to be adjusted forward or backward. Release the lever and the seat will lock in that position. Under the right side of the seat there is a spring loaded red lever. Pulling up on the lever allows the seat to swivel, when released the seat will lock into one of 4 positions.
Tiller
Angle
Adjustment
Lever
Tiller Angle
Adjustment Knob
Figure 5A
Figure 5B
Seat Removal (Fig. 7)
Fold down the back of the seat. Pull up the swivel seat adjustment lever (fig. 6) and lift seat off. Remove the
Seat Height Adjustment (Fig. 7) Remove seat as described above. Loosen the seat tightening hand knob. The seat height can be adjusted to 5 different settings by inserting the steel locking pin in the required hole. Retighten the hand knob and replace the seat.
Swivel Seat
Adjustment
Lever
Seat
Adaptor
Seat
Tightening
Hand Knob
Figure 6
Seat Slide Lever
Seat
Locking
Pin
Armrest Width Adjustments (Fig. 8) On the underside of the seat there are two hand knobs, one either side. Loosening the hand knob allows the arm rest to be adjusted to the required width, or removed for transportation.
Do not use the scooter without the arms
being fitted.
Figure 7
Armrest
Adjustment
Hand Knob
Figure 8
5/11/2004 | 7 |
