Shure 561 manual Specifications, Furnished Accessories, Optional Accessories, Replacement Parts

SPECIFICATIONS

Type

Dynamic

Frequency Response

40 to 10,000 Hz (See Figure 2)

+10

dB	0
	–10
			2	3	4	5 6 789	2	3	4	5 6 789
	20	50	100			1000				10000	20000

Hz

TYPICAL FREQUENCY RESPONSE

FIGURE 2

Polar Pattern

Omnidirectional

Impedance

Rated at 150 Ohms (200 Ohms actual). Designed for connection to inputs rated at 19 to 300 Ohms.

Output Level (at 1,000 Hz)

Open Circuit Voltage . . . . . . –57.5 dBV/Pa (1.33 mV) (1 Pa = 94 dB SPL)

Polarity

Positive pressure on diaphragm produces positive voltage on the white cable lead relative to the blacklead.

Cable

1.2m (4 ft.) two-conductor, shielded, unterminated

Stand Thread

Suitable for mounting on stand or gooseneck with 5/8”–27 thread.

Case

Silver and black aluminum with stainless steel grille

Dimensions

See Figure 3

67.1mm

(2–21/32 in.)

34.5 mm DIA. (1–3/8 in.)

5/8 in.–27 thread

Nameplate

#4–40 Allen setscrews

Net Weight

142 grams (5 oz.)

Packaged Weight

255 grams (9 oz.)

Certification

Conforms to European Union directives, eligible to bear CE marking; meets European Union EMC Immunity Requirements (EN 50 082-1, 1992).

FURNISHED ACCESSORIES

Allen wrench (No. 4) 80A67

OPTIONAL ACCESSORIES

Gooseneck, 45.7 cm (18 in.)	G18
Gooseneck, 45.7 cm (18 in.), Side Vent	G18A
Gooseneck, 30.5 cm (12 in.)	G12
Gooseneck, 15.25 cm (6 in.), Side Vent	G6A
Mounting Flange	A12
Heavy-Duty Mounting Flange	A13HD

REPLACEMENT PARTS

Cartridge	R50
Screen and Grille Assembly	RK85G

For additional service or parts information, please contact the Shure Service Department at 1-800-516-2525. Outside the United States, please contact your authorized Shure Service Center.

ARCHITECTS' SPECIFICATION

The microphone shall be a moving coil (dynamic) type with a frequency response of 40 to 10,000 Hz. It shall have an omnidirectional polar characteristic and a low impedance rated at 150 Ohms for connection to inputs rated 19 to 300 Ohms. The microphone output level shall be –57.5 dBV/Pa. It shall be equipped with a non-detachable 1.2 m (4 ft.) cable. The microphone shall be threaded for mounting on a stand or gooseneck with a 5/8"–27 thread. The overall dimensions of the microphone shall be 67.1 mm (2–21/32 in.) in length and 34.5 mm (1–3/8 in.) in diameter. The microphone shall be the Shure Model 561 or equivalent.

OVERALL DIMENSIONS

FIGURE 3

SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446 Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

2