E4g

Sound Isolating Earphones

Sound isolating gaming earphones with High-Definition Drivers featuring Tuned Port technology—delivering ultra-wide frequency audio with improved bass for incredible audio reproduction from portable gaming devices and other audio sources.

WEARING THE EARPHONES

Three popular methods for wearing the earphones are illustrated below.

Over the ear

in back

Over the ear in front

Straight down

INSERTING THE EARPHONES

If the earphone seems to be lacking in low frequency response (bass), check the tightness of the seal between the earphone and your ear, or try one of the other sleeve options.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

right ear left ear

Tighten the cable and take up slack by raising the cable sleeve .

­©2005, Shure Incorporated

­Printed in U.S.A.

27EN3207 (Rev. 2)

 

Make sure that the sleeve completely covers the earphone nozzle. If any part of the nozzle is exposed, the sleeve is not properly installed.

CHOOSING AN EARPHONE SLEEVE

Your earphones come with a selection of sleeves. Make sure the sleeve you use is easy to insert into your ear, fits comfortably, and is easy to remove from your ear.

Flex Sleeves

In small, medium, and large sizes. Made from translucent

PVC.

Soft Flex Sleeves

In small, medium, and large sizes. Made from pliable rubber.

Foam Sleeves

When using the foam sleeves, compress the sleeve between your fingers before inserting it into the ear canal. Hold the earphone in place for about ten seconds while the foam expands and creates a tight seal.

Triple-Flange Sleeves

If desired, the sleeve nozzle may be shortened. Use sharp scissors to carefully trim the nozzle to the desired length.

CLEANING THE EARPHONE NOZZLE

If the nozzle of your earphone is blocked, clean the nozzle using the supplied wax removal loop.

Wax Removal Loop

Nozzle

When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter.

If necessary, the supplied replacement nozzles may be used. See the back of this guide for instructions on nozzle replacement.

FULL TWO YEAR WARRANTY

Shure Incorporated (“Shure”) hereby warrants that this product will be free from defects in materials and workmanship for a period of two years from the date of purchase. At its option Shure will repair or replace the defective product and promptly return it to you, or refund the purchase price. You should retain proof of purchase to validate the purchase date and return it with any warranty claim.

If you believe this product is defective within the warranty period, carefully repack the unit, insure it, and return it postage prepaid to:

Shure Incorporated

5800 W. Touhy Ave.

Niles, IL 60714-4608

SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean:

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446 Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

Page 1
Image 1
Shure E4G warranty Wearing the Earphones, Inserting the Earphones, Choosing AN Earphone Sleeve, Full TWO Year Warranty