Shure specifications Model MX200 Series Microphones, Features, Specifications, Certification

Model MX200 Series Microphones

Specification Sheet

MODEL MX200 SERIES MICROPHONES

Shure Microflexr MX200 Series microphones are miniature electret condenser microphones designed for miking choirs and performance groups. They are typically suspended over the heads of the performers. Their high sensitivity and wide fre- quency range make them suitable for recording, as well as sound reinforcement applications. An attached 101 mm (4 in.) gooseneck allows them to be easily aimed at the sound source.

FEATURES

SWide dynamic range and frequency response for accurate sound reproduction across the audio spectrum

SInterchangeable cartridges that provide an optimal polar pattern choice for each application

SBalanced, transformerless output for increased immunity

to noise over long cable runs

SSupplied stand-mount adapter for portable applications (in-line preamplifier versions only)

SWhite or black finish that blends unobtrusively with most surroundings

SPECIFICATIONS

Frequency Response (Figure 1)

50 to 17,000 Hz

Polar Pattern (Figure 2)

Output Impedance

EIA Rated at 150 Ω (180 Ω actual)

Sensitivity (At 1,000 Hz, open circuit voltage*)

Cardioid:	–35.0 dBV/Pa (17.8 mV)
Supercardioid:	–33.5 dBV/Pa (21.1 mV)

Omnidirectional: –27.5 dBV/Pa (42.2 mV) *1 Pascal = 94 dB SPL

Maximum SPL (1 kHz at 1% THD, 1 kΩ load)

Cardioid:	124.2 dB
Supercardioid:	122.7 dB
Omnidirectional: 116.7 dB
Equivalent Output Noise (A-weighted)
Cardioid:	28.0 dB SPL
Supercardioid:	26.5 dB SPL

Omnidirectional: 20.5 dB SPL

Signal to Noise Ratio (referenced at 94 dB SPL)

Cardioid:	66.0 dB
Supercardioid:	67.5 dB

Omnidirectional: 73.5 dB

Dynamic Range at 1 kΩ Load

96.2 dB

Common Mode Rejection

45.0 dB minimum

Preamplifier Output Clipping Level (1% THD)

–6.0 dBV (0.5 V)

Polarity

Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.

Power Requirements

11 to 52 Vdc phantom, 2.0 mA

Environmental Requirements

Operating Temperature Range: –18°C to 57° C (0° F to 135° F)

Relative Humidity: 0 to 95%

Dimensions (Figure 3)

CERTIFICATION

Eligible to bear CE Marking. Conforms to European EMC Di- rective 89/336/EEC. Meets applicable tests and perfor- mance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environ- ments.

REPLACEMENT PARTS
Omnidirectional Cartridge (Black)	R183B
Omnidirectional Cartridge (White)	R183W
Supercardioid Cartridge (Black)	R184B
Supercardioid Cartridge (White)	R184W
Cardioid Cartridge (Black)	R185B
Cardioid Cartridge (White)	R185W
Snap-Fit Windscreens (Black, 4 per	RK183WS
pkg.)
Preamplifier kit, plate mounted	RK202PK
Stand Adaptor	65B1752

E2002, Shure Incorporated