
Model R103 User Guide
REPLACEMENT DYNAMIC CARTRIDGE
The Shure Model R103 is a direct replacement car- tridge for the Shure Model 514B Omnidirectional Dy- namic Paging Microphone. Note that the R103 and included parts may differ somewhat from those in the 514B Microphone. The R103 will provide performance equal to or better than that of the original cartridge.
INSTALLATION AND CONNECTIONS
To install the R103, proceed as follows:
1.Remove three No.
CAUTION: The microphone cartridge is
1.Gently separate two halves of case, watching for loose
2.Remove parts from case front: shield, rear adapter, cartridge and gasket assembly, front adapter and pad (previous production), or shield, cartridge and washer assembly, and screen (later production).
3.Unsolder YELLOW and WHITE leads from car- tridge terminals.
4.Install new washer on new cartridge and solder YELLOW and WHITE leads to cartridge terminals.
5.Insert screen and cartridge and washer assembly in case front as shown in illustration.
6.Replace shield with gag directly adjacent to cable entry, making sure that retaining springs will engage properly in notches in shield.
7.Close case halves, taking care that leads are not pinched and will not touch blades of switch and bracket assembly.
8.Holding case halves firmly together, fasten them with three No.
SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL
Phone:
Shure Europe GmbH, Phone:
Shure Asia Limited, Phone:
©2005, Shure Incorporated |
| Printed in U.S.A. |
27C1393 (Rev. 4) |
|
|
|
|
|
|
|
|