Cleaning the Earphone Nozzle
If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear obstruction by
using wire loop end of cleaning tool.
Cleaning
Tool
Wire Loop
Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter.
Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears, could result in injury.
Accessories
• | Earphone Sleeves | • Music Phone Accessory Cables | |
• | Replacement Cables | • | Volume Control |
• | Carrying Cases | • | Adapters |
For more information visit www.shure.com
Maintenance
•Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.
•Keep the earphones and sleeves as clean and dry as possible.
•To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing.
•Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use
•Do not expose earphones to extreme temperatures.
•Replace the sleeves if they do not fit properly.
•Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure.
•Note: The cable connectors to the earphones may collect debris or other deposits that can affect audio quality. If this happens, disconnect the cables and clean them using a dry cotton swab.
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Technical Specifications
| SE425 |
Transducer type | Dual |
Sensitivity (at 1khz) | 109 dB SPL/mW |
Impedance (at 1kHz) | 22 Ω |
Frequency Range | 20 Hz - 19 kHz |
Input connector | 3.5mm (1/8 in.) |
Net weight | 29.5 g (1.04 oz) |
Operational temperature | |
Storage temperature |
CERTIFICATION
Eligible to bear CE Marking. Conforms to EMC Directive 2004/108/EC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments. The Declaration of Conformity can be obtained from the address below.
Shure Europe GmbH
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Wannenacker Str. 28
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: EMEAsupport@shure.de
| United States, Canada, Latin | Europe, Middle East, Africa: | Asia, Pacific: |
| America, Caribbean: | Shure Europe GmbH | Shure Asia Limited |
| Shure Incorporated | Wannenäckestr. 28, | 22/F, 625 King’s Road |
| 5800 West Touhy Avenue | 74078 Heilbronn, Germany | North Point, Island East |
| Niles, IL | Phone: | Hong Kong |
| Phone: | Phone: | |
| Fax: | ||
| Fax: | Fax: | |
| Email: info@shure.de | ||
| Fax: | Email: info@shure.com.hk | |
|
| ||
| Email: info@shure.com |
|
|
www.shure.com | ©2010 Shure Incorporated |
|
|
3
