Shure UA830 manual Installation

INSTALLATION

1.Thread the Shure Model UA830 unit on the supplied stand (Figure 2), or on a 5/8 in.-27 thread microphone stand.

2.Connect the antenna to the TO ANTENNA port on the Model UA830 unit (Figure 2).

3.Using 50 W low-loss coaxial cable (purchased separately, Shure UA825 or UA850 or UA8100 recommended), connect the TO RECEIVER port of the UA830 to the Shure Model UR4 or ULX wireless receiver or UA845, or UA844 Antenna Distribution System (see Figure 3 for UR4 Receiver example).

4.If a second UA830 Line Amplifier is needed for extremely long cable runs (over 15 m [50 ft]), (Shure model UR4 and UA845 only) repeat steps 1 to 3. See Adjusting for Different Cable Lengths.

TO ANTENNA

2.

1.

ATTACHING THE BASE AND ANTENNA

FIGURE 2

3.

WALL MOUNTED

TO RECEIVER

ANTENNA IN

UR4 WIRELESS

RECEIVER

antenna B in		receiver outputs	networking
		200Ω
			network
	line	lift	activity
12.7V out			ethernet
	mic	GND
150mA			RJ-45

CONNECTING THE RECEIVER

FIGURE 3

MIC-STAND MOUNTED

antenna A in

12.7V out

150mA

3