Shure installation instructions MODEL UA860SWB UHF PASSIVE, Omnidirectional Antenna

Model UA860SWB UHF Passive Omnidirectional Antenna User Guide

MODEL UA860SWB UHF PASSIVE

OMNIDIRECTIONAL ANTENNA

The Shure UA860SWB is a passive wide band UHF omnidirectional antenna. The UA860SWB is weather resistant and suitable for use outdoors.

INSTALLATION INSTRUCTIONS

Selecting Cable

Determine the length of cable required to connect the UA860SWB antenna to a receiver or transmitter. Use only 50 Ω low-loss cables (RG-8X or equivalent).

Shure recommends the following coaxial cables for mounting remote antennas:

•UA825 Extension Cable (7.6 m [25 ft])

•UA850 Extension Cable (15.2 m [50 ft])

•UA8100 Extension Cable (30.4 m [100 ft])

NOTE: Shure recommends using the UA830SWB In-Line Amplifier with gain selector switch, for cable lengths longer than

7.6 m ([25 ft]).

IMPORTANT:

Always perform a “walk around” test to verify coverage prior to actual use. Experiment with antenna placement to find the optimum location for the UA860SWB.

NOTE: For additional technical assistance, call the Shure Customer Service Department at 1-800-516-2525. In Europe, phone 49-7131-72140.

SPECIFICATIONS

RF Frequency Range

470–1100 MHz

Voltage Standing Wave Ratio (VSWR)

<2:1 referenced to 50Ω

Reception Pattern

Omnidirectional dipole

Connector

Female, BNC-type

Dimensions

284 mm H X 39 mm Dia. (11-3/16 X 1-9/16 in.)

Stand Adapter

Break resistant, with standard (UNS) 5/8 in.–27 thread

Net Weight (without cable)

275 g (9.72 oz.)

FURNISHED ACCESSORIES

UHF Coaxial Antenna Cable, 61 cm (2 ft.) . . . . . . . . . . . UA802 UHF Coaxial Antenna Cable, 7.6 m (25 ft.) . . . . . . . . . . . UA825 Stand Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WA371 Thread Adapter (Euro) 5/8” to 3/8” . . . . . . . . . . . . . . . 31A1856

©2007, Shure Incorporated	Printed in U.S.A.
27D3186 (Rev. 1)