Shure instruction sheet Model WA503 Instruction Sheet, Bracket Installation

Model WA503 Instruction Sheet

WA503 SINGLE RACK, FRONT–MOUNT ANTENNA CONVERSION KIT

Bracket Installation

1.Remove the screws from each side of the receiver. See Figure 1

RECEIVER (TOP VIEW)

FRONT

FIGURE 1

2.Secure the brackets (not supplied with the WA503 kit) to the sides of the receiver with the screws re- moved in Step 1. See Figure 2.

RECEIVER (TOP VIEW)

FRONT

BRACKETBRACKET

FIGURE 2

NOTE: There are four holes in each bracket. Use the rear holes if the re- ceiver is to be recessed; use the front holes to mount it flush to the rack.

WA503 Adapter & Cable Installation

1.Insert the WA503 adapters through the holes in each bracket, and se- cure them from each side, using the attaching hardware. See Figure 3.

2.Connect the supplied antenna cables to the receiver antenna inputs and WA503 adapters. See Figure 4.

ANTENNA	ANTENNA
CABLE	CABLE

RECEIVER (TOP VIEW)

FRONT

FIGURE 4

3.Screw the antennas into the bulk- head adaptors protruding through the front panel. See Figure 5.

RECEIVER (TOP VIEW)

FRONT

ANTENNAANTENNA

FIGURE 5

4.Insert the receiver into the equip- ment rack and secure the brackets to the rack with the supplied screws. See Figure 6.

WA503

ADAPTER

RECEIVER (TOP VIEW)

FRONT

FIGURE 3

WA503	EQUIPMENT RACK
ADAPTER	FIGURE 6
	NOTE: For more information, call
	Shure Customer Service at
	1–847–600–2000.

♥2006, Shure Incorporated	Printed U.S.A.
27B8445 (Rev. 3)