Siemens ACS3110 user manual Change Program Master

Change Program Master

9 Change Program Master

This procedure replaces the old Program Master by a new one. The old Program Master is thereby voided from the SiPass standalone memory and the new badge is declared as Program Master instead. This is helpful if e.g. an other Program Master than the normal one was added to the memory during wake-up.

Present the new Program Master a further 5 times to step through the remaining steps, back to Normal mode.

Normal	Enter	Declare new	Void old
mode	Program Mode	Program Master,	Program Master,
		enter Void Mode	enter Add Mode
Read	Read	Read	Read
Open	Open	Open	Open
Closed	Closed	Closed	Closed
Night lock	Night lock	Night lock	Night lock
Add	Add	Add	Add
Void	Void	Void	Void
Program	Program	Program	Program
	Old Prog. Master	New Prog. Master	Old Prog. Master

Fig. 4 Change Program Master

Any new / unknown badge can be declared as new Program Master.

If change Program Master function is not desired, just present the old Program Master again the necessary number of times to get to the desired programming step.

11

Siemens Building Technologies

Fire Safety & Security Products 02.2005