Siemens C2-010 - page 19

ADSL2+ Router User’s Guide

4-7

Route

NAT Enabled/Disabled − this enables or disables NAT (Network Address Translation) on the

router. This should normally be enabled.

IGMP Enabled/Disabled − this enables or disables IGMP (Internet Group Management Protocol) on

the router. This should normally be enabled.

Contents

Main Page Contents Page 1. Overview 1.1 1.2 Features Device Introduction Page C2-010 / C2-010-I ADSL2+ Router Users Guide 2. Installation Planning 2.1 2.2 Packing List Interfaces Introduction 2.3 Cable Connections Page C2-010 / C2-010-I ADSL2+ Router Users Guide 2.3.4 Hub or Switch to ADSL2+ Router Connection 2.4 Power on 3. Before Configuring ADSL2+ Router 3.1 Set up TCP/IP on Your PC 3.3 3.2 Set up Proxy Service 3.4 First Time Log on 4. Web-based Management 4.1 Summary 4.2 Configuring the WAN Connection Page C2-010 / C2-010-I ADSL2+ Router Users Guide 4.2.1 Configuring a Bridged Connection for the WAN ADSL2+ Router Users Guide 4.2.2 Static IP Address for Connection WAN Page Page C2-010 / C2-010-I ADSL2+ Router Users Guide 4.2.3 Dynamic IP Address Connection for WAN Page C2-010 / C2-010-I ADSL2+ Router Users Guide 4.2.4 PPPoE and PPPoA Connection for WAN Page C2-010 / C2-010-I ADSL2+ Router Users Guide 4.3 DHCP Configuration 4.3.1 DHCP Server Settings for the LAN 4.3.2 Use the ADSL2+ Router for DHCP ADSL2+ Router Users Guide 4.3.3 Disabling the DHCP Server 4.4 DNS Server Setting 4.5 Configuring the LAN Connection Page 5. Advanced Configuration 5.1 UPnP Configuration 5.2 Virtual Server Configuration 5.3 SNMP Configuration 5.4 Outbound IP Filter Configuration 5.5 Inbound IP Filter Configuration Page 5.6 Firewall 5.7 DMZ 5.8 RIP 5.9 PPP 5.10 ADSL 5.11 ATM VCC Page 6. Tools 6.1 Administrators Settings 6.2 Configure System Time 6.3 Save ADSL2+ Router Configuration Settings Page 6.8 Test 7. 7.1 Device Info 7.2 Log 7.3 Traffic Statistics Page Page 8.1 8. Attachments Technical Specifications Page 9. Appendix A WEEE B2C