2
Compatibility Issues
Before
installing the PPX:505–6860 converter
,
ensure that your system hardware is
compatible with the PPX:505–6860, as defined
below:
Compatibility with Bases
The PPX:505–6860 RS-485/RF converter can be
installed in the following type of bases:
•PPX:505–6504
4-slot base
•PPX:505–6508
8-slot base
•PPX:505–6511 1
1-slot
dual media base
•PPX:505–6516
16-slot base
Compatibility with CPUs
The PPX:505–6860 RS-485/RF converter is
compatible with firmware Rel. 3.0 or later in
the following CPUs:
•PPX:545–1102
•PPX:555–1101
•PPX:555–1102
•PPX:575–2102
•PPX:575–2103
Compatibility with Power Supplies
The PPX:505–6860 RS-485/RF converter can be
powered by the following supplies:
•PPX:505–6660 1
15/230 V
AC
•PPX:505–6660A 1
15/230 V
AC
(dual media compatible)
•PPX:505–6663
24 VDC
(dual media compatible)
Compatibility with Remote Bases
The PPX:505–6860 RS-485/RF converter is
compatible with bases controlled by the
following Remote Base Controllers (RBCs):
•PPX:505–6850
RF RBC
•PPX:505–6850A
RF RBC
(dual media compatible)
•PPX:500–2112
RF RBC
•PPX:500–2114A
RF RBC
(dual media compatible)
•PPX:500–9912
RF RBC
(dual media compatible); cannot use dual
media with this unit, replace it with a
PPX:500–2114A.
NOTE:
The RBC must have firmware Rel. 3.0 or
later if you use the dual media option or RBE
function.