34

ProLINE-RoadRunner Operator’s Guide
To align the tape pockets:
1. Select Align Pocket from the
Operator Menu.
2. Press the Up Arrow button to
advance the tape until the next
tape pocket center hole is
approximately centered at the
pick point alignment mark. Do
not advance devices past the pick
point. They may fall and jam the
tape path. Do not use the Down
Arrow to align.
NOTE: This aligning procedure
must be performed each time
power is applied, such as after
releasing the Emergency
Stop.
Aligning the Tape Pockets
1Job
Advance Pocket
> Align Pocket
Purge 2