Getting started

17

Insert SIM card/battery

The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.

Press the lock n, then remove the battery upwards in the direction of the arrow o.

n

o

Insert the SIM card in the opening with the contact area facing downwards and push gently until it engages below the holder (make sure the angled corner is in the cor- rect position p).

p

Insert the battery in the lower edge q, then press downwards runtil it engages.

r

q

Remove SIM card

Remove the battery. First push the SIM card sgently through the slot for the holder and at the same time lift it up slightly ton the other side. Then remove the SIM card completely.

s

t

Additional information

Always switch off the phone before removing the battery!

Only 3V SIM cards are supported. Please contact your service provider, if you have an older card.

Functions with SIM card ..................

p. 122