18

Getting started

Charge battery

The battery is not fully charged when delivered. Plug charger cable into the bottom of the phone, plug power supply unit into a power socket power socket and charge for at least two hours.

Display when charging is in progress

hDuring charging.

Charging time

An empty battery is fully charged after about 2 hours. Charging is only possible within the temperature range 41 °F to 104 °F. At 41 °F above or below, the charge icon blinks as a warning. The mains voltage specified on the power supply unit must not be exceeded.

Charge icon not visible

If the battery is totally discharged, no charge icon is displayed when the charger is plugged in. It will appear after two hours at most. In this case the battery is fully charged after 3–4 hours.

Only use the charger provided! Display while in service

Charge level display during opera-

tion (empty-full):

a d g

A beep sounds when the battery is nearly empty. The battery level is only shown correctly during an unbroken charging/discharging cycle. You should therefore not remove the battery unnecessarily and where possible not finish the loading process early.

Additional information

The charger heats up when used for long periods. This is normal and not dangerous.

Outside your own home network .....

p. 118

Performance....................................

p. 119