JUMPERS:
Jumpers are provided for custom configuration. No jumper changes for normal Black Signal operation. See the Service Manual for jumper details. Note: Jumpers selection to be performed by qualified personnel only.
ADJUSTMENTS:
Adjustments are provided for custom configuration. No adjustments are required for normal Black Signal operation. Note: Adjustments to be performed by qualified personnel only.
OUTPUTS: |
| SPECIFICATIONS |
|
| |
(6) Blackburst, per | ||
(6) Blackburst, per CCIR | ||
LEVELS: | In accordance with standards specified. | |
SCH PHASE: | 0° ± 5° | |
SCH JITTER: | < 2° | |
SETUP & SUPERBLACK: | Jumper Selection, +7.5, 0, | |
MASTER CRYSTAL STABILITY: | ...... | 14.318180 MHz TCXO (NTSC) |
17.734475 MHz TCXO (PAL) |
| |
Initial | 1 PPM |
|
vs. Time | 1 PPM/Year | |
vs. Temperature ... | 1 PPM, 0° C to +50° C | |
CONNECTORS: | BNC | |
POWER: |
|
|
VOLTAGE RANGE: | 100 to 240 VAC | |
LINE FREQUENCY: | 50 to 60 (± 5%, 47 to 63 Hz) | |
POWER CONSUMPTION: | 6 Watts nominal (9 Watts max.) | |
CONNECTOR: | Power; IEC 320 | |
ENVIRONMENTAL: |
|
|
OPERATIONAL TEMPERATURE: ... | +32° to +131° F (0° to +50° C) | |
MECHANICAL: |
|
|
DIMENSIONS: | 1.75” H x 5.5” W x 8.5” D (44.5 x 140 x 216 mm) | |
SHIPPING WEIGHT: | 4 lb. (1.8 kg) |
TECHNICAL MANUAL:
Technical Manual is available upon request. See the Service Manual
WARRANTY:
Sigma Electronics, Inc. warrants that it’s products are free from defective material and workmanship at the time of shipment from Sigma Electronics. The products will possess the electrical characteristics as set forth in the specifications for a warranty period of five years. This warranty does not include any Sigma Electronics product or part thereof which have been subjected to misuse, neglect, improper installation, use in violation of instructions furnished, or accident. It does not extend to products that have been modified from original design outside the factory. Nor does it extend to units from which the serial number has been removed, defaced, or changed. Nor does it extend to accessories not of Sigma Electronics, Inc. manufacture.
3 of 4
All specifications, drawings, dimensions, weights and other details are subject to change without notification. Information is intended to give a general performance and operation guideline of the product.
Sigma Electronics, Inc.; P.O.Box 448; 1027 Commercial Avenue; | East Petersburg, PA |
Main Office: Tel: (717) |
|
REV6 DEC98 |