Force Flow Heaters Installation & Operation Manual
UNIVERSAL FORCE FLOW COLLARS
A standard trim which is used on any semi- recessed or fully recessed model. Mounted on sight to allow for infinite mounting depth adjustment. Simply mark the depth location of the desired reveal minus 1/2" for the trim thickness and fasten the side bars centered with the front edge on the line. (Figure 4 shows sides being mounted to a fully recessed model wall mount)
The top and bottom bars have pocketed ends to provide quick and easy alignment. The protruding ends of the side bar (Figure 2 & 3) fit snugly in the pockets and provides the proper alignment for the top/bottom bar to be fastened to the cabinet. For floor mount units the bottom bar is not used and the sides are fastened even with the bottom of the unit and do not protrude. The collars have been designed for this so no cutting is required on the side bars. The top is mounted normally and the extra protrusion of the side bar does not affect the mounting.
FIGURE 4
ASSEMBLY VIEW FOR
FULLY RECESSED
UNIT
FIGURE 2
SIDES AND TOP ALIGNED AND READY TO BE FITTED
FIGURE 3
ASSEMBLED SIDE AND TOP
www.sigmaproducts.com Tel: (905) | 3 |
|
Rev 3
