Troubleshooting

Power and Battery

 

Problem

Possible cause

Solution

Page

 

 

The batteries are exhausted.

Insert fresh or fully-charged spare batteries.

8

 

 

The batteries are not in the correct orienta-

Re-insert the batteries in the correct orienta-

8

 

 

tion.

tion.

 

 

 

 

The camera does

The battery-chamber cover is not latched.

Latch the battery-chamber cover.

9

 

The AC adapter and DC coupler are not con-

Make sure that the AC adapter and DC coupler

 

 

not turn on.

—

 

nected properly.

are properly connected.

 

 

 

 

 

The camera has been left for an extended

After inserting the batteries or connecting the

 

 

 

period with no batteries inserted and the

AC adapter/DC coupler, wait a few moments

—

 

 

AC adapter/DC coupler unplugged.

before turning the camera on.

 

 

 

 

Warm the batteries by placing them in a pocket

 

 

 

The batteries are cold.

or other warm place and re-insert them in the

v

 

 

 

camera immediately before taking a picture.

 

Power

 

There is dirt on the battery terminals.

Clean the terminals with a soft, dry cloth.

—

supply

 

 

Discharge Ni-MH batteries using the P DIS-

 

 

 

The batteries are new, have been left unused

CHARGE option and recharge them in a bat-

 

 

The battery runs

for an extended period, or have been re-

tery charger (sold separately). If the batteries

107

 

down quickly.

charged without fi rst being fully discharged

do not hold a charge after repeated discharg-

 

 

(rechargeable Ni-MH batteries only).

ing and recharging, they have reached the end

 

 

 

 

of their service life and must be replaced.

 

 

 

EHIGH SPEED SHOOTING is on.

Turn EHIGH SPEED SHOOTING off to re-

—

 

 

duce the drain on the battery.

 

 

 

 

 

 

uCONTINUOUS AF is selected for F

Select a different focusing option.

83

 

 

FOCUSING.

 

 

 

The camera turns

The batteries are exhausted.

Insert fresh or fully-charged spare batteries.

8

 

The AC adapter or DC coupler has been dis-

Make sure that the AC adapter and DC coupler

 

 

off suddenly.

—

 

connected.

are properly connected.

 

 

 

Troubleshooting

111